LOS ALAMOS, N.M., Jan. 15, 2020 — Scientists at Los Alamos National Laboratory have incorporated meticulously engineered colloidal quantum dots into a new type of LED containing an integrated optical resonator, which allows the LEDs to function as lasers.
Science fiction writers envisioned the technology decades ago, and startups have been working on developing an actual product for at least 10 years.
Today, Mojo Vision announced that it has done just that—put 14K pixels-per-inch microdisplays, wireless radios, image sensors, and motion sensors into contact lenses that fit comfortably in the eyes. The first generation of Mojo Lenses are being powered wirelessly, though future generations will have batteries on board. A small external pack, besides providing power, handles sensor data and sends information to the display. The company is calling the technology Invisible Computing, and company representatives say it will get people’s eyes off their phones and back onto the world around them.
The first application, says Steve Sinclair, senior vice president of product and marketing, will likely be for people with low vision—providing real-time edge detection and dropping crisp lines around objects. In a demonstration last week at CES 2020, I used a working prototype (albeit by squinting through the lens rather than putting it into my eyes), and the device highlighted shapes in bright green as I looked around a dimly lit room.
Use of an AC rather than a DC electric field can improve the piezoelectric response of a crystal. Now, an international team of researchers say that cycles of AC fields also make the internal crystal domains in some materials bigger and the crystal transparent.
“There have been reports that the use of AC fields could significantly improve the piezoelectric responses—for example by 20% to 40%—over DC fields and the improvements have always been attributed to the smaller internal ferroelectric domain sizes that resulted from the cycles of AC fields,” said Long-Qing Chen, Hamer Professor of Materials Science and Engineering, professor of engineering science and mechanics, and professor of mathematics at Penn State. “About three years ago, Dr. Fei Li, then a research associate at the Materials Research Institute at Penn State, largely confirmed the improvement of piezoelectric performances from application of AC fields. However, it was not clear at all how the internal ferroelectric domains evolved during AC cycles.
”Our group does mostly computer modeling, and more than a year ago we started looking into what happens to the internal domain structures if we apply AC fields to a ferroelectric piezoelectric crystal. We are very curious about how the domain structures evolve during AC cycles. Our computer simulations and theoretical calculations did show an improved piezoelectric response, but our simulations also demonstrated that the ferroelectric domain sizes actually got bigger during AC cycles rather than smaller as reported in the literature.”
Batteries are the key to decarboni z ing both transport and the grid, but today’s technology is still a long way from living up to this promise. IBM seems to have decided its computing chops are the key to solving the problem.
Lithium-ion batteries are still the gold standard technology in this field, and they’ve come a long way; 10 years ago they could just about get your iPod through the day, today they can power high-performance cars over hundreds of miles.
But if we want to reach a point w h ere batteries can outperform gasoline or store huge amounts of solar energy, we need some breakthroughs. So IBM has teamed up with Mercedes-Benz and its parent company Daimler to develop new batteries that could match up to our needs.
IBS scientists and their colleagues have recently report an ultimate electrocatalyst that addresses all of the issues that trouble H2O2 production. This new catalyst comprising the optimal Co-N4 molecules incorporated in nitrogen-doped graphene, Co1-NG(O), exhibits a record-high electrocatalytic reactivity, producing up to 8 times higher than the amount of H2O2 that can be generated from rather expensive noble metal-based electrocatalysts.
Just as we take a shower to wash away dirt and other particles, semiconductors also require a cleaning process. However, its cleaning goes to extremes to ensure even trace contaminants “leave no trace.” After all the chip fabrication materials are applied to a silicon wafer, a strict cleaning process is taken to remove residual particles. If this high-purity cleaning and particle-removal step goes wrong, electrical connections in the chip are likely to suffer from it. With ever-miniaturized gadgets on the market, the purity standards of the electronics industry reach a level equivalent to finding a needle in a desert.
That explains why hydrogen peroxide (H2O2), a major electronic cleaning chemical, is one of the most valuable chemical feedstocks that underpins the chip-making industry. Despite the ever-growing importance of H2O2, its industry has been left with an energy-intensive and multi-step method known as the anthraquinone process. This is an environmentally unfriendly process which involves the hydrogenation step using expensive palladium catalysts. Alternatively, H2O2 can be synthesized directly from H2 and O2 gas, although the reactivity is still very poor and it requires high pressure. Another eco-friendly method is to electrochemically reduce oxygen to H2O2 a via 2-electron pathway. Recently, noble metal-based electrocatalysts (for example, Au-Pd, Pt-Hg, and Pd-Hg) have been demonstrated to show H2O2 productivity although such expensive investments have seen low returns that fail to meet the scalable industry needs.
Circa 2013
The unique relationship between the coordinates in the bore of a Magnetic Resonance Imaging (MRI) scanner and the magnetic field gradients used for MRI allows building a localization system based on the measurement of these gradients. We have previously presented a miniature 3D Hall probe integrated in a low cost, low voltage 0.35μm CMOS chip from which we were able to measure the magnetic gradient 3D maps of 1.5T and 3T MRI scanners. In this paper, this 3D Hall probe has been integrated in a magnetic tracking device prototype and an algorithm was built to determine the position of the probe. First experimental results show that the probe gives its position with accuracy close to a few millimeters, and that sub-millimeter localization in a one-shot-3ms-measurement should be readily possible. Such a prototype opens the way for the development of MRI compatible real time magnetic tracking systems which could be integrable in surgical tools for MR-guided minimally-invasive surgery.
In October 2019, Google made a big announcement. It announced its 53-qubit quantum computer named Sycamore had achieved ‘quantum supremacy.’ That’s when quantum computers can complete tasks exponentially more quickly than their classical counterparts. In this case, Google said its quantum machine completed a task in 200 seconds that would have taken the world’s most powerful computer 10,000 years to complete. IBM, another major player in quantum computing, took issue with the findings. Either way, it was a big milestone in quantum computing, and it’s leading to a lot of hype in the field. Here’s how quantum computing works, and how it could change everything from Wall Street to Big Pharma and beyond.
» Subscribe to CNBC: https://cnb.cx/SubscribeCNBC
» Subscribe to CNBC TV: https://cnb.cx/SubscribeCNBCtelevision
» Subscribe to CNBC Classic: https://cnb.cx/SubscribeCNBCclassic
Continue reading “The Hype Over Quantum Computers, Explained” »
No matter how cheap or fast paid internet service gets, the Internet of Things (IOT) won’t take wings until we have ubiquitous access to a completely decentralized, open-standard network that does not require a provider subscription. This month, we may be a step closer.
Let’s talk about internet connected gadgets. Not just your phone or PC—and not even a microwave oven or light bulb. Instead, think of everyday objects that are much smaller and much less expensive. Think of things that seemingly have no need to talk with you.
Now think of applications in which these tiny things need to communicate with each other and not just with you. Think of the cost of this “thing” compared to the added cost of continuous communications. Do so many things really need to talk in the first place?
First, there were Trackers…
Continue reading “IOT needs decentralized, long-range connectivity. It’s finally coming” »
Particle accelerators like the Large Hadron Collider (LHC) are incredibly useful – and usually incredibly huge – instruments for studying some of the fundamentals of particle physics. But now scientists have managed to squeeze one on to a silicon chip.
It’s nowhere near as powerful as the bigger versions, as you might expect, but the new particle accelerator chip could still be very helpful for researchers who aren’t able to access gigantic particle accelerator setups.
While this first model is only a prototype, the team behind it is hopeful that it’s a first step towards providing a more compact alternative to the well-known massive particle accelerators, including the LHC and the SLAC National Accelerator Laboratory.
Chip Walter’s new book is titled “Immortality Inc.: Renegade Science, Silicon Valley Billions and the Quest to Live Forever.” It’s about the money, and the research, that’s seeking a way to extend human life indefinitely.
Chip Walter discusses “Immortality, Inc.” at Pittsburgh Arts & Lectures: 6 p.m. Thu., Jan. 16. Carnegie Library of Pittsburgh Main Branch, 4400 Forbes Ave., Oakland.
Sounds like science fiction, but Walter thinks breakthroughs are just around the corner.
