Lifeboat Foundation

At a test facility in rural Illinois, engineers fabricate structural segments for buildings. But instead of using typical assembly techniques, here at this dirt-floor arena with tightly controlled conditions, teams employ robotic nozzles to extrude domes, beams and cylinders using material chosen for its similarity to the regolith found on the surface of the planet Mars.

The activity comprises part of the 3D-Printed Mars Habitat Design Challenge, which focuses on how to go about building structures on Mars to eventually house human explorers. It’s a component of the NASA Centennial Challenges, a contest series that solicits the public to solve the practical problems of future space exploration. The third phase of the challenge, underway now, focuses on creating stable structural members using an additive manufacturing process based on basaltic rock geologically similar to what is found on Mars.

“This leg of the competition is focused on the materials, specifically the indigenous Mars regolith,” explains Tony Kim, deputy program manager for NASA’s Centennial Challenge. “All of the teams are approaching it differently.” Previous phases of the challenge focused on conceptual designs for habitats and proof-of-concept 3D-printed shapes. But this showdown emphasizes pure structural strength, as the 3D-printed cylinders, beams and domes will be subjected to loading until they fail.

Continue reading “3D Printing Buildings on Mars Has Lessons for Back on Earth” »

As part of its support for the application 3D printing technology to deep space exploration, NASA has awarded a $250,000 prize to a joint team consisting of members from Foster+Partners California and Branch Technology (based in Chattanooga, Tennessee).

NASA’s competition, which has now reached level three of its second phase, aims to “advance construction technology needed to create sustainable housing solutions for Earth and beyond”, most notably with the aim of accommodating astronauts on Mars and building human colonies in outer space.

Moving PCB production in-house can save over 60% in prototyping time, produce better products, and greatly reduce the supply chain.

https://youtube.com/watch?v=wvwXgZhrr-s

One manufacturing company just made history by successfully using a special 3D printer in extreme, space-like conditions.

The team printed polymer alloy parts in a super-high vacuum, and hope their new tech will allow the design and manufacture of much more ambitious spacecraft and space-based telescopes.

Continue reading “Meet The First-Ever 3D Printer That Can Do Construction in The Vacuum of Space” »

“If astronauts are going to make journeys that span several years, we’ll need to find a way to reuse and recycle everything they bring with them,” says Mark A. Blenner, assistant professor of chemical and biomolecular engineering at Clemson University, South Carolina.

To this end, the Blenner Research Group is looking into the potential uses of a type of yeast called Yarrowia lipolytica, that feeds on the urea content of urine.

With a little genetic engineering the group has proven that the yeast can be used to produce hydrogen and carbon – the atomic ingredients of nutrients like Omega 3, and polyester-based 3D printer filament.

Continue reading “Astronauts may depend upon recycled urine filament for 3D printing in space” »

https://youtube.com/watch?v=-5jcq3RlxJQ

Cell by Cell

3D-printing technology has made significant strides over the past several years. What started as a tool for producing small objects can now be used to craft food, build houses, and even construct “space fabric.”

Continue reading “Scientists Have Developed a New Method to 3D-Print Living Tissue” »

Made In Space has announced the completion of its three-part project focused on the additive manufacturing of radiation shields it launched earlier this summer, and tested them aboard the International Space Station (ISS).

TCT first reported the printing of the protective shields which are being used on NASA’s Bigelow Expandable Activity Module (BEAM) – connected to the ISS – in May. Made In Space (MIS) used its Additive Manufacturing Facility to produce the shields, which grew in thickness as the testing phase went on. The first was made at 1.1mm thick, the second at 3.3mm and the third at 10mm, all in ABS plastic.

The shields include within them channels which hold Radiation Enclosure Monitors (REM), sensors being used on the BEAM to test for radiation, recording the measurements. Astronauts aboard the ISS would change these devices at regular intervals between April and end of June, when the project concluded.

Continue reading “Made In Space announces completion of 3D printed radiation shields project” »

In recent years 3D printing of aerospace components has made great strides with ever larger parts, faster production and synergy with other materials, including composites. AEROSPACE gets an update on the latest progress from Scott Sevcik, Head of Manufacturing Solutions at international 3D printing company Stratasys.

Scott Sevcik, Head of Manufacturing Solutions, Stratasys. (Stratasys)

Scientists aim to 3D print human tissue so they can better study how new drugs interact with our bodies. A recent advance? 3D printed blood vessels.