Menu

Blog

Page 6684

Dec 12, 2020

Hubble Discovers a Strange Exoplanet That Resembles the Long-Sought “Planet Nine”

Posted by in category: space

The 11-Jupiter-mass exoplanet called HD106906 b occupies an unlikely orbit around a double star 336 light-years away and it may be offering clues to something that might be much closer to home: a hypothesized distant member of our Solar System dubbed “Planet Nine.” This is the first time that astronomers have been able to measure the motion of a massive Jupiter-like planet that is orbiting very far away from its host stars and visible debris disc.

The exoplanet HD106906 b was discovered in 2013 with the Magellan Telescopes at the Las Campanas Observatory in Chile’s Atacama Desert. However, astronomers did not then know anything about the planet’s orbit. This required something only the Hubble Space Telescope could do: collect very accurate measurements of the vagabond’s motion over 14 years with extraordinary precision.

Dec 12, 2020

Amazon selling prescription medication will push public trust in Prime to the limit

Posted by in category: futurism

Amazon Pharmacy is the first time its Prime service has broken into a market where consumers might stop and worry about their data.

Dec 12, 2020

Tesla’s German Gigafactory construction rolls on, despite hibernating snakes

Posted by in category: sustainability

Reptiles having their annual nap are the latest roadblock to Tesla’s progress in Berlin, but a local court said the carmaker can carry on.

Dec 12, 2020

Autonomous drone carries an 8 lb payload and unlimited flight time

Posted by in categories: drones, military, robotics/AI, surveillance

Easy Aerial claims its Albatross UAS is a tethered machine that has an unbreachable data connection.


Drone startup Easy Aerial has launched a new unmanned aerial system (UAS), called Albatross, a tethered device with unlimited flight time and an unbreachable data connection.

The drone hexacopter can carry an 8.5 lb payload capacity with three hardpoints, two on the side that can carry up to 4 lb and the bottom hardpoint that can carry payloads of up to 8 lb. The side payload stations feature standard mounting as well as Picatinny rails that support a wide range of applications such as floodlights, communications relays, loudspeakers and cyber-related and other commercial and military electronic systems. The bottom hardpoint is designed for gimbaled cameras or large ISR loads such as radar or communication jammers.

Continue reading “Autonomous drone carries an 8 lb payload and unlimited flight time” »

Dec 12, 2020

This Massive New Vertical Farm Can Produce 1,000 Tons of Produce a Year

Posted by in categories: food, robotics/AI, sustainability

Once running at full capacity by the end of next year, its creators say, the facility will be able to generate a ton of food. Produce can be harvested up to 15 times a year without needing any soil or daylight.

Automated robots will be used to both plant seeds and check in on them later as well.

Nordic Harvest envisions that other massive facilities like it could have a major impact on the global fresh food supply. In fact, vertical farms covering an area of 20 soccer fields could grow enough greens for the entirety of Denmark, the startup argues, as reported by Fast Company.

Dec 12, 2020

Proving the Existence of the Quark-Gluon Plasma With Gravitational Waves

Posted by in categories: computing, particle physics, space

Computer models of merging neutron stars predicts new signature in the gravitational waves to tell when this happens.

Neutron stars are among the densest objects in the universe. If our Sun, with its radius of 700,000 kilometers were a neutron star, its mass would be condensed into an almost perfect sphere with a radius of around 12 kilometers. When two neutron stars collide and merge into a hyper-massive neutron star, the matter in the core of the new object becomes incredibly hot and dense. According to physical calculations, these conditions could result in hadrons such as neutrons and protons, which are the particles normally found in our daily experience, dissolving into their components of quarks and gluons and thus producing a quark-gluon plasma.

Continue reading “Proving the Existence of the Quark-Gluon Plasma With Gravitational Waves” »

Dec 12, 2020

Yoctosecond photon pulses from quark-gluon plasmas

Posted by in categories: evolution, particle physics

Circa 2009


Present ultrafast laser optics is at the frontier between atto- and zeptosecond photon pulses, giving rise to unprecedented applications. We show that high-energetic photon pulses down to the yoctosecond time scale can be produced in heavy-ion collisions. We focus on photons produced during the initial phase of the expanding quark-gluon plasma. We study how the time evolution and properties of the plasma may influence the duration and shape of the photon pulse. Prospects for achieving double-peak structures suitable for pump-probe experiments at the yoctosecond time scale are discussed.

Dec 12, 2020

The “singleton hypothesis” predicts the future of humanity

Posted by in category: futurism

Philosopher Nick Bostrom’s “singleton hypothesis” predicts the future of human societies.

Dec 12, 2020

An outside-the-box take on time

Posted by in categories: cosmology, education, physics

The history of the Universe thus far has certainly been eventful, marked by the primordial forging of the light elements, the birth of the first stars and their violent deaths, and the improbable origin of life on Earth. But will the excitement continue, or are we headed toward the ultimate mundanity of equilibrium in a so-called heat death? In The Janus Point, Julian Barbour takes on this and other fundamental questions, offering the reader a new perspective—illustrated with lucid examples and poetically constructed prose—on how the Universe started (or more precisely, how it did not start) and where it may be headed. This book is an engaging read, which both taught me something new about meat-and-potatoes physics and reminded me why asking fundamental questions can be so fun.

Barbour argues that there is no beginning of time. The Big Bang, he maintains, was just a very special configuration of the Universe’s fundamental building blocks, a shape he calls the Janus point. As we move away from this point, the shape changes, marking the passage of time. The “future,” he argues, lies in both directions, hence the reference to Janus, the two-faced Roman god of beginnings and transitions.

Barbour illustrates his main points with a deceptively simple model known as the three-body problem, wherein three masses are subject to mutual gravitational attraction. In this context, the Janus point occurs when all three masses momentarily occupy the same point, in what is called a total collision. The special shape at the Janus point, explains Barbour, is an equilateral triangle, which is his model’s version of the Big Bang. I found this imagery helpful when trying to understand the more abstract, and necessarily less technical, application of this concept to general relativity.

Dec 12, 2020

Genetic engineering transformed stem cells into working mini-livers that extended the life of mice with liver disease

Posted by in categories: bioengineering, biotech/medical, chemistry, computing, food, genetics, life extension, neuroscience

Takeaways * Scientists have made progress growing human liver in the lab. * The challenge has been to direct stems cells to grow into a mature, functioning adult organ. * This study shows that stem cells can be programmed, using genetic engineering, to grow from immature cells into mature tissue. * When a tiny lab-grown liver was transplanted into mice with liver disease, it extended the lives of the sick animals.* * *Imagine if researchers could program stem cells, which have the potential to grow into all cell types in the body, so that they could generate an entire human organ. This would allow scientists to manufacture tissues for testing drugs and reduce the demand for transplant organs by having new ones grown directly from a patient’s cells. I’m a researcher working in this new field – called synthetic biology – focused on creating new biological parts and redesigning existing biological systems. In a new paper, my colleagues and I showed progress in one of the key challenges with lab-grown organs – figuring out the genes necessary to produce the variety of mature cells needed to construct a functioning liver. Induced pluripotent stem cells, a subgroup of stem cells, are capable of producing cells that can build entire organs in the human body. But they can do this job only if they receive the right quantity of growth signals at the right time from their environment. If this happens, they eventually give rise to different cell types that can assemble and mature in the form of human organs and tissues. The tissues researchers generate from pluripotent stem cells can provide a unique source for personalized medicine from transplantation to novel drug discovery. But unfortunately, synthetic tissues from stem cells are not always suitable for transplant or drug testing because they contain unwanted cells from other tissues, or lack the tissue maturity and a complete network of blood vessels necessary for bringing oxygen and nutrients needed to nurture an organ. That is why having a framework to assess whether these lab-grown cells and tissues are doing their job, and how to make them more like human organs, is critical. Inspired by this challenge, I was determined to establish a synthetic biology method to read and write, or program, tissue development. I am trying to do this using the genetic language of stem cells, similar to what is used by nature to form human organs. Tissues and organs made by genetic designsI am a researcher specializing in synthetic biology and biological engineering at the Pittsburgh Liver Research Center and McGowan Institute for Regenerative Medicine, where the goals are to use engineering approaches to analyze and build novel biological systems and solve human health problems. My lab combines synthetic biology and regenerative medicine in a new field that strives to replace, regrow or repair diseased organs or tissues. I chose to focus on growing new human livers because this organ is vital for controlling most levels of chemicals – like proteins or sugar – in the blood. The liver also breaks down harmful chemicals and metabolizes many drugs in our body. But the liver tissue is also vulnerable and can be damaged and destroyed by many diseases, such as hepatitis or fatty liver disease. There is a shortage of donor organs, which limits liver transplantation. To make synthetic organs and tissues, scientists need to be able to control stem cells so that they can form into different types of cells, such as liver cells and blood vessel cells. The goal is to mature these stem cells into miniorgans, or organoids, containing blood vessels and the correct adult cell types that would be found in a natural organ. One way to orchestrate maturation of synthetic tissues is to determine the list of genes needed to induce a group of stem cells to grow, mature and evolve into a complete and functioning organ. To derive this list I worked with Patrick Cahan and Samira Kiani to first use computational analysis to identify genes involved in transforming a group of stem cells into a mature functioning liver. Then our team led by two of my students – Jeremy Velazquez and Ryan LeGraw – used genetic engineering to alter specific genes we had identified and used them to help build and mature human liver tissues from stem cells. The tissue is grown from a layer of genetically engineered stem cells in a petri dish. The function of genetic programs together with nutrients is to orchestrate formation of liver organoids over the course of 15 to 17 days. Liver in a dishI and my colleagues first compared the active genes in fetal liver organoids we had grown in the lab with those in adult human livers using a computational analysis to get a list of genes needed for driving fetal liver organoids to mature into adult organs. We then used genetic engineering to tweak genes – and the resulting proteins – that the stem cells needed to mature further toward an adult liver. In the course of about 17 days we generated tiny – several millimeters in width – but more mature liver tissues with a range of cells typically found in livers in the third trimester of human pregnancies. Like a mature human liver, these synthetic livers were able to store, synthesize and metabolize nutrients. Though our lab-grown livers were small, we are hopeful that we can scale them up in the future. While they share many similar features with adult livers, they aren’t perfect and our team still has work to do. For example, we still need to improve the capacity of the liver tissue to metabolize a variety of drugs. We also need to make it safer and more efficacious for eventual application in humans.[Deep knowledge, daily. Sign up for The Conversation’s newsletter.]Our study demonstrates the ability of these lab livers to mature and develop a functional network of blood vessels in just two and a half weeks. We believe this approach can pave the path for the manufacture of other organs with vasculature via genetic programming. The liver organoids provide several key features of an adult human liver such as production of key blood proteins and regulation of bile – a chemical important for digestion of food. When we implanted the lab-grown liver tissues into mice suffering from liver disease, it increased the life span. We named our organoids “designer organoids,” as they are generated via a genetic design. This article is republished from The Conversation, a nonprofit news site dedicated to sharing ideas from academic experts. It was written by: Mo Ebrahimkhani, University of Pittsburgh. Read more: * Brain organoids help neuroscientists understand brain development, but aren’t perfect matches for real brains * Why are scientists trying to manufacture organs in space?Mo Ebrahimkhani receives funding from National Institute of Health, University of Pittsburgh and Arizona Biomedical Research Council.