Toggle light / dark theme

“This is the first study to use pressure to control this stability, and it really opens up a lot of possibilities,” Yu Lin, researcher at the Stanford Institute for Materials and Energy Sciences (SIMES), said in a statement.

“Now that we’ve found this optimal way to prepare the material, there’s potential for scaling it up for industrial production, and for using this same approach to manipulate other perovskite phases,” Lin added.

The “black” phase, the one successfully stabilized by the scientists, of perovskite has intrigued scientists for years since it has been found to be extremely efficient in converting sunlight to electricity, making it the Holy Grail for solar panel technology.

  • Hyundai’s new campaign showcases the technology of the Hyundai NEXO, the first fuel cell electric SUV registered in Spain
  • The video shows how the brand’s ambassador Mireia Belmonte trains while connected to the vehicle’s exhaust system
  • The Hyundai NEXO, which only emits water vapor and purifies 99.9% of air, truly portrays Hyundai’s commitment to the development of eco-friendly vehicles

Hyundai Motor Spain has launched a campaign featuring brand ambassador and sportswoman Mireia Belmonte, which tests out Hyundai NEXO’s clean hydrogen fuel-cell technology.

Advanced optoelectronics require materials with newly engineered characteristics. Examples include a class of materials named metal-halide perovskites that have tremendous significance to form perovskite solar cells with photovoltaic efficiencies. Recent advances have also applied perovskite nanocrystals in light-emitting devices. The unusually efficient light emission of cesium lead-halide perovskite may be due to a unique excitonic fine structure made of three bright triplet states that minimally interact with a proximal dark singlet state. Excitons are electronic excitations responsible for the emissive properties of nanostructured semiconductors, where the lowest-energy excitonic state is expected to be long lived and hence poorly emitting (or ‘dark’).

In a new report now published in Science Advances, Albert Liu and a team of scientists in physics and chemistry at the University of Michigan, U.S., and Campinas State University, Brazil, used multidimensional coherent spectroscopy at cryogenic (ultra-cold) temperatures to study the fine structure without isolating the cube-shaped single . The work revealed coherences (wave properties relative to space and time) involving the triplet states of a cesium lead-iodide (CsPbI3) nanocrystal ensemble. Based on the measurements of triplet and inter-triplet coherences, the team obtained a unique exciton fine structure level ordering composed of a dark state, energetically positioned within the bright triplet manifold.

Circa 2008


December 122008 Massachusetts-based FloDesign has developed a wind turbine that could generate electricity at half the cost of conventional wind turbines. The company’s design, which draws on technology developed for jet engines, circumvents a fundamental limit to conventional wind turbines. Typically, as wind approaches a turbine, almost half of the air is forced around the blades rather than through them, and the energy in that deflected wind is lost. At best, traditional wind turbines capture only 59.3 percent of the energy in wind, a value called the Betz limit.

Jet engine wind turbine

FloDesign is a spin-off from the aerospace company FloDesign based in Wilbraham, MA which recently raised $6 million in its first round of venture financing. Their turbine design surrounds its wind-turbine blades with a shroud that directs air through the blades and speeds it up, which increases power production. The shroud concept is based on the same principles as a high bypass jet engine design that is used by all commercial jet aircraft engines to reduce noise and significantly improve efficiency. The new design generates as much power as a conventional wind turbine with blades twice as big in diameter. The smaller blade size and other factors allow the new turbines to be packed closer together in the field compared to conventional turbines, increasing the amount of power that can be generated per acre of land.

There were the cleaners, with large padded feet, who were apparently polishing their way the whole length…’ — Arthur C. Clarke, 1972.

IceBot Antarctic (Planetary?) Robotic Explorers Made Of Ice ‘Some will combine in place to form more complicated structures, like excavators or centipedes.’ — Greg Bear, 2015.

Study: Robots Encourage Humans To Take Risks Not exactly Three Laws compliant.

BladeBUG Robots Clean Massive Wind Turbine Blades ‘There were the cleaners, with large padded feet, who were apparently polishing their way the whole length…’ — Arthur C. Clarke, 1972.

IceBot Antarctic (Planetary?) Robotic Explorers Made Of Ice ‘Some will combine in place to form more complicated structures, like excavators or centipedes.’ — Greg Bear, 2015.

Study: Robots Encourage Humans To Take Risks Not exactly Three Laws compliant.

Over the past few years, researchers have been trying to develop new designs for perovskite solar cells that could improve their performance, efficiency and stability over time. One possible way of achieving this is to combine 2-D and 3D halide perovskites in order to leverage the advantageous properties of these two different types of perovskites.

The two-dimensional crystal structure of 2-D halide perovskites is highly resistant to moisture; thus, it could help to increase the performance and durability of solar with a light-absorbing 3D halide perovskite layer. However, most of the strategies for combining 2-D and 3D halide perovskites proposed so far simply entail mixing these two materials together (e.g., mixing 2-D precursors with a solution-based 3D perovskite or reacting 2-D precursor solutions on top of a 3D perovskite layer).

Researchers at Seoul National University and Korea University have recently devised an alternative approach for creating solar cells that combine 2-D and 3D halide perovskites. This approach, outlined in a paper published in Nature Energy, could help to simultaneously improve both the efficiency and long-term stability of these cells.