Toggle light / dark theme

Optimizing Ag-Doped TiO2 Coatings for Enhanced Visible-Light Photocatalythic on Glazed Ceramic Tiles

Abstract

Titanium dioxide (TiO2) coatings are widely studied for self-cleaning ceramic applications due to their strong photocatalytic activity under ultraviolet (UV) light. However, their effectiveness under visible light is limited by a wide bandgap and rapid electron-hole recombination. This study addresses this limitation by investigating silver (Ag) doping as a strategy to enhance the visible-light photocatalytic response of TiO2 coatings. Ag-TiO2 coatings with varying Ag contents (2.5, 5, and 7.5 mol%) were deposited on glazed ceramic tiles via a dip-coating method, followed by calcination at 500˚C. The structural, morphological, and compositional characteristics of the coatings were examined using X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission SEM (FESEM), and energy-dispersive X-ray spectroscopy (EDX). Photocatalytic performance was assessed by monitoring the degradation of methylene blue (MB) under both UV and visible light. The results indicate that the 5 mol% Ag formulation yielded the highest observed photocatalytic activity under the reported visible-light conditions. The anatase crystallite size increased from 8.46 nm at 0 mol% Ag to 14.5 nm at 5 mol% Ag; therefore, the activity maximum cannot be attributed to reduced crystallite size. Coating thickness and the observed morphological defects should also be considered when interpreting this result. The findings underscore the potential of Ag-doped TiO2 coatings as effective, visible-light-active materials for self-cleaning ceramic surfaces, with broader implications for antibacterial and environmental remediation applications.

Ag-Doped TiO2, Visible-Light, Photocatalysis, Glazed Ceramic Tile

Leave a Comment

Lifeboat Foundation respects your privacy! Your email address will not be published.