Lifeboat Foundation: Safeguarding Humanity
Toggle light / dark theme

Blog – Page 7879

Chemists at the University of Wisconsin-Madison and their collaborators have created a highly efficient and long-lasting solar flow battery, a way to generate, store and redeliver renewable electricity from the sun in one device.

The new device is made of silicon solar cells combined with advanced solar materials integrated with optimally designed chemical components. The solar flow battery, made by the Song Jin lab in the UW-Madison chemistry department, achieved a new record efficiency of 20 percent. That bests most commercially available silicon solar cells used today and is 40 percent more efficient than the previous record holder for solar flow batteries, also developed by the Jin lab.

Read more | >

Evidence has emerged for long-proposed, but previously unconfirmed quasiparticles called anyons. The concept of anyons goes back 43 years, and physicists have found evidence collections of particles are behaving as anyons for some time, but have lacked confirmation. Now, within months of each other, two teams have found different methods to verify that this is what they are dealing with that look much more conclusive.

The universe’s particles are divided into two sorts; fermions and bosons. Fermions, including the components of atoms, cannot occupy the same quantum state as each other while bosons, which include photons of light, have no such problem.

Anyone who has spent much time around physicists will not be surprised to learn that many have wondered if there could be something else. For some, the so-called “particle zoo” is never sufficiently weird and wonderful. This led to the proposal of anyons, which can only exist in two-dimensional space.

Read more | >

Cardiff University scientists have devised a new way of making reactions up to 70 times faster by using state-of-the-art equipment to spin chemicals around.

They found that efficient mixing within a chemical reaction could be achieved by spinning chemicals and catalysts around in a small tube, causing the reactions to happen much quicker.

The new findings could have a profound influence on the way that chemicals are made in a wide variety of industries, from drug development to agriculture and fragrances.

Read more | >

Circa 2019

The European Space Agency (ESA) study is investigating how practical constructing a manned base on the moon only using 3D printing technology could be, given that it would rely primarily on lunar dirt for building materials.

“Terrestrial 3D printing technology has produced entire structures,” Laurent Pambaguian, who heads the project for ESA, said in a statement. “Our industrial team investigated if it could similarly be employed to build a lunar habitat.”

Read more | >

Circa 2016

“In 2050 there will be trillions of self-replicating robot factories on the asteroid belt,” he tells the audience at WIRED2016.

“A few million years later, AI will colonise the galaxy. Humans are not going to play a big role there, but that’s ok. We should be proud of being part of a grand process that transcends humankind more than the industrial revolution. It is comparable to the invention of life itself, and I am privileged to live this moment and witness the beginnings of this.” — Jürgen Schmidhuber

Continue reading “VIDEO: Trillions of self replicating robots will likely colonize the galaxy” | >

Is a process in nuclear physics in which the nucleus of an atom splits into two or more smaller nuclei as fission products, and usually some by-product particles. Hence, fission is a form of elemental transmutation. The by-products include free neutrons, photons usually in the form gamma rays, and other nuclear fragments such as beta particles and alpha particles. Fission of heavy elements is an exothermic reaction and can release substantial amounts of useful energy both as gamma rays and as kinetic energy of the fragments (heating the bulk material where fission takes place). Nuclear fission produces energy for nuclear power and to drive explosion of nuclear weapons.

Read more | >

Further improvements in nuclear propulsion system efficiency beyond nuclear-electric (NEP) are possible. The fission process accelerates the fission fragments to velocities between 3–5% of the speed of light, far faster than the 0.027% achieved by NEP, which uses a conventional nuclear reactor to convert the kinetic energy of the fission fragments into heat, the heat into electricity, and the electricity back into Xe ion kinetic energy with eficiencies much less than 40%. In the fission fragment reactor, the high-speed fragments are used directly as the rocket exhaust after charge neutralization. Therefore the fission fragment rocket can produce a specific impulse (Isp) greater than one million seconds.[CR][CR]Previous concepts suRered from impractical or inadequate methods to cool the fission fuel. In this work the heating problem is overcome by dividing the solid fuel into small dust particles and thereby increasing the surface to volume ratio of the fuel. The small size of the fuel particle allows adequate cooling to occur by the emission of thermal radiation.

Read more | >

Liquid metal machine can also be made as tiny motors. In fact, the micro- or even nanomotors that could run in a liquid environment is very important for a variety of practices such as serving as pipeline robot, soft machine, drug delivery, microfluidics system, etc. However, fabrication of such tiny motors is generally rather time and cost consumptive and has been a tough issue due to the involvement of too many complicated procedures and tools. This lab had discovered a straightforward injectable way for spontaneously generating autonomously running soft motors in large quantity Yao et al (Injectable spontaneous generation of tremendous self-fuelled liquid metal droplet motors in a moment, 2015 [ ]). It was demonstrated that injecting the GaIn alloy pre-fuelled with aluminum into electrolyte would automatically split in seconds into tremendous droplet motors swiftly running here and there. The driving force originated from the galvanic cell reaction among alloy, aluminum, and surrounding electrolyte, which offers interior electricity and hydrogen gas as motion power. This finding opens the possibility to develop injectable tiny-robots, droplet machines, or microfluidic elements. It also raised important scientific issues regarding characterizing the complicated fluid mechanics stimulated by the quick running of the soft metal droplet and the gases it generated during the traveling. Our lab Yuan et al (Sci Bull 60:1203–1210, 2014 [ ]) made further efforts to disclose that the self-powered liquid metal motors takes interiorly driven macroscopic Brownian motion behavior. Such tiny motors in millimeter-scale move randomly at a velocity magnitude of centimeters per second in aqueous alkaline solution, well resembling the classical Brownian motion. However, unlike the existing phenomena where the particle motions were caused by collisions from the surrounding molecules, the random liquid metal motions are internally enabled and self-powered, along with the colliding among neighboring motors, the substrate, and the surrounding electrolyte molecules. This chapter illustrates the typical behaviors of the self-powered tiny liquid metal motors.

Read more | >