Lifeboat Foundation

With a focus on building the archetypal missions for NASA’s new Space Launch System rocket, the U.S.-based Boeing Corporation has outlined their view of what technologies can be used to accomplish humankind’s goal of visiting crews to the Martian system – missions Boeing believes are possible through the combination of the SLS rocket’s lift capability, the bourgeoning Solar Electric Propulsion technology field, and Bigelow’s soon-to-be-tested inflatable habitat modules.

From the Earth-Moon system to Mars:

Continuing from their initial presentation on potential SLS rocket uses beyond the opening two circumlunar missions, the Boeing Corporation has presented their idea of how to execute a phased approach to deep space exploration – with an eye for the eventual goal of landing human beings on the surface of Mars.

Continue reading “Boeing outlines technology for crewed Mars missions” »

As fast as fiber optic lines have become, they’re still hamstrung by one key limitation: you still need to transmit that data over wires, which limits where you can transmit and the affordability of the fastest connections. Scientists may have a way to eliminate those cables while offering even faster speeds, though. They’ve discovered a way to ‘twist’ photons in a way that not only crams more data into each transmission, but survives interference from turbulent air. If you pass light through a special hologram, you can give photons an optical angular momentum that lets them carry more than just 1s and 0s — and so long as the light’s phase and intensity are right, you can reliably beam that data over long distances.

The research team successfully tested just such a link over a 1-mile stretch in Germany, making sure that it took place in an urban environment where the turbulence from taller buildings could theoretically cause chaos.

There’s still a lot of work to be done before this kind of wireless networking is practical. How do you serve a large number of people, and how is data affected by rain or snow? Still, it’s promising. The technology is clearly limited by the challenges of transmitting light (you couldn’t use this to transmit indoors, for obvious reasons), but it could be instrumental to the next generation of last-mile wireless networks. Instead of having to painstakingly wire homes and offices to achieve multi-gigabit speeds, internet providers could use light-based wireless links for large parts of their network and install cabling only when it’s absolutely necessary.

Continue reading “Twisted light could make wireless data faster than fiber” »

Before astronauts ever venture to Mars, materials for a red planet habitat will undergo space testing. The inflatable Mars Ice Home, designed by Clouds Architecture Office (Clouds AO), Space Exploration Architecture (SEArch), and NASA’s Langley Research Center, could protect explorers from radiation in the extreme environment of Mars – and the materials that could comprise the dome will soon be assessed aboard the International Space Station (ISS).

Russia has become the first country in Europe to use a 3D printer to construct a real residential house. https://sptnkne.ws/fKYu

Las Vegas, NV and Centennial, Colo. (Oct. 17, 2017) – Bigelow Aerospace and United Launch Alliance (ULA) are working together to launch a B330 expandable module on ULA’s Vulcan launch vehicle. The launch would place a B330 outfitted module in Low Lunar Orbit by the end of 2022 to serve as a lunar depot.

“We are excited to work with ULA on this lunar depot project,” said Robert Bigelow, president of Bigelow Aerospace. “Our lunar depot plan is a strong complement to other plans intended to eventually put people on Mars. It will provide NASA and America with an exciting and financially practical success opportunity that can be accomplished in the short term. This lunar depot could be deployed easily by 2022 to support the nation’s re-energized plans for returning to the Moon.

”This commercial lunar depot would provide anchorage for significant lunar business development in addition to offering NASA and other governments the Moon as a new exciting location to conduct long-term exploration and astronaut training.”

You could drive past and never see the only farm in San Carlos, California. The tiny city of 30,000 that sits between San Francisco and Silicon Valley has all the charms of suburbia—sprawling office parks and single-story homes—but doesn’t seem a likely suspect for agriculture.

The farm, run by startup Iron Ox, is nestled between three stonemasons and a plumber in a nondescript office park building; there’s no greenhouse, no rows of freshly-tilled soil, or tractor parked outside. Only peeking in the large bay door reveals the building’s tenants: a few hundred plants and two brightly-colored robot farmers.

Iron Ox looks a lot like a tech company. One of its co-founder is an ex-Google engineer and it raised $1.5 million in pre-seed venture capital from Y Combinator, Pathbreaker, and Cherubic Ventures in April 2016. Instead of fake food, or plant-based meat meals, or even a food delivery service tethered to an app, Iron Ox is reinventing farming, raising real, not faux, food. Think hydroponically raised lettuce and basil, like what you’d get at an ordinary farmers market.

The market is definitely there. But, it needs to be able to do a minimum amount of practical things, in about this order: 1. it needs to be able to cook even the most basic of meals, being unable to cook for themselves is usually the main reason someone has to go into a nursing home; 2. being able to clean your average kitchen and bathroom; 3. being able to do basic yard tasks, operating a lawnmower and a snowblower. Those would be the most important, after those get mastered have it equipped to do more niche tasks and entertainment features.

As to when, we have clumsy humanoid robots right now, and AI will supposedly reach human level around 2029. It will just be a task of merging those two between now and then, and getting that robot down to a reasonable cost, which i think would be in the neighborhood of a brand new SUV.

As artificial intelligence advances, we humans will form relationships with our robot helpers and caregivers.

Continue reading “Your future companion in your old age could be a robot” »

Building a house by hand can be both time-consuming and expensive. Numerous homebuilders have chosen to automate part of the construction (i.e., by printing the home’s parts) instead.

A new Ukrainian homebuilding startup called PassivDom uses a 3D printing robot that can print parts for tiny houses. The machine can print the walls, roof, and floor of PassivDom’s 380-square-foot model in about eight hours. The windows, doors, plumbing, and electrical systems are then added by a human worker.

When complete, the homes are autonomous and mobile, meaning they don’t need to connect to external electrical and plumbing systems. Solar energy is stored in a battery connected to the houses, and water is collected and filtered from humidity in the air (or you can pour water into the system yourself). The houses also feature an independent sewage system.

Continue reading “A Robot Can Print This $32,000 House in as Little as 8 Hours” »

How the tech giant is trying to leverage the science of breakthroughs and resurrect the lost art of invention

A snake-robot designer, a balloon scientist, a liquid-crystals technologist, an extradimensional physicist, a psychology geek, an electronic-materials wrangler, and a journalist walk into a room. The journalist turns to the assembled crowd and asks: Should we build houses on the ocean?