Lifeboat Foundation: Safeguarding Humanity
Toggle light / dark theme

Blog

Category: engineering – Page 191

Finding the best light-harvesting chemicals for use in solar cells can feel like searching for a needle in a haystack. Over the years, researchers have developed and tested thousands of different dyes and pigments to see how they absorb sunlight and convert it to electricity. Sorting through all of them requires an innovative approach.

Now, thanks to a study that combines the power of supercomputing with and experimental methods, researchers at the U.S. Department of Energy’s (DOE) Argonne National Laboratory and the University of Cambridge in England have developed a novel “design to device” approach to identify promising materials for dye-sensitized solar cells (DSSCs). DSSCs can be manufactured with low-cost, scalable techniques, allowing them to reach competitive performance-to-price ratios.

The team, led by Argonne materials scientist Jacqueline Cole, who is also head of the Molecular Engineering group at the University of Cambridge’s Cavendish Laboratory, used the Theta supercomputer at the Argonne Leadership Computing Facility (ALCF) to pinpoint five high-performing, low-cost dye materials from a pool of nearly 10,000 candidates for fabrication and device testing. The ALCF is a DOE Office of Science User Facility.

Read more

Center for Nanoscale Materials researchers present a quantum model for achieving ground-state cooling in low frequency mechanical resonators and show how cooperativity and entanglement are key factors to enhance the cooling figure of merit.

A resonator with near-zero thermal noise has better performance characteristics in nanoscale sensing, quantum memories, and quantum information processing applications. Passive cryogenic cooling techniques, such as dilution refrigerators, have successfully cooled high-frequency resonators but are not sufficient for lower frequency systems. The optomechanical effect has been applied successfully to cool low-frequency systems after an initial cooling stage. This method parametrically couples a mechanical resonator to a driven optical cavity, and, through careful tuning of the drive frequency, achieves the desired cooling effect. The optomechanical effect is expanded to an alternative approach for ground-state cooling based on embedded solid-state defects. Engineering the atom-resonator coupling parameters is proposed, using the strain profile of the mechanical resonator allowing cooling to proceed through the dark entangled states of the two-level system ensemble.

Read more

Michelle Khine is a professor of biomedical engineering at the University of California, Irvine. Nine months ago, her newborn son was hospitalized for complications during childbirth and was admitted to the neonatal intensive care unit (NICU). While in the NICU, her son was connected to several machines that were supplying oxygen and monitoring his breathing.

A biomedical engineering research team from the University of California has developed a new wearable respiratory sensor to monitor children with chronic pulmonary conditions. The design was built with inspiration from a favorite childhood toy, Shrinky Dinks.

Read more

In an interview newly published by Popular Mechanics, SpaceX CEO Elon Musk shared his thoughts on colonizing Mars — from how the first settlers will grow food to the friendly vibe he envisions at the first base on the Red Planet.

“For having an outdoorsy, fun atmosphere, you’d probably want to have some faceted glass dome, with a park, so you can walk around without a suit,” Musk told the magazine. “Eventually if you terraform the planet, then you can walk around without a suit. But for say, the next 100-plus years, you’ll have to have a giant pressurized glass dome.”

Read more

However, a shortage of hi-tech research capacity in the region is turning into a hindrance, according to analysts, with most of China’s top-notch science and engineering schools located in the northern and eastern provinces. Although Hong Kong has several universities in the world’s top 100, only a few of them have a science and technology focus.

China’s ‘Greater Bay Area’ plan aims to erase barriers between cities in the region in terms of policy, financing, logistics and talent.

Read more

Researchers from Texas A&M University, led by Dr. Akhilesh K. Gaharwar, have developed a new way to deliver treatment for cartilage regeneration.

Gaharwar, assistant professor in the Department of Biomedical Engineering at Texas A&M, said the nanoclay-based platform for sustained and prolonged delivery of protein therapeutics has the potential to impact treating osteoarthritis, a degenerative disease that affects nearly 27 million Americans and is caused by breakdown of cartilage that can lead to damage of the underlying bone.

As America’s population ages, the number of osteoarthritis incidences is likely to increase. One of the greatest challenges with treating osteoarthritis and subsequent joint damage is repairing the damaged tissue, especially as cartilage tissue is difficult to regenerate.

Read more

Summary: Researchers have identified a previously unknown form of neural communication. They report the findings could help better the understanding of neural activity associated with specific brain processing and neurological disorders.

Source: Case Western Reserve University.

Biomedical engineering researchers at Case Western Reserve University say they have identified a previously unidentified form of neural communication, a discovery that could help scientists better understand neural activity surrounding specific brain processes and brain disorders.

Read more

The United States should devote substantially more resources to nuclear fusion research and build an ambitious prototype fusion power plant, according to a new report.

The report is the work of the National Academies of Sciences, Engineering, and Medicine. Its conclusion: it’s more important than ever for the U.S. and the world to explore roads to practical fusion power.

Read more

With this new nanophotonic device, scientists might have just unlocked how to harness the data transfer potential of “twisted light”.

How Ferroelectricity Could Change the Way We Store Data- https://youtu.be/watch?v=IwT_ECJ1TEY

Angular-momentum nanometrology in an ultrathin plasmonic topological insulator film.

https://www.nature.com/articles/s41467-018-06952-1
“Complementary metal–oxide–semiconductor (CMOS) technology has provided a highly sensitive detection platform for high-resolution optical imaging, sensing and metrology. Although the detection of optical beams carrying angular momentum have been explored with nanophotonic methods, the metrology of optical angular momentum has been limited to bulk optics. We demonstrate angular-momentum nanometrology through the spatial displacement engineering of plasmonic angular momentum modes in a CMOS-compatible plasmonic topological insulator material.”

Twisted Light Could Dramatically Boost Data Rates.
https://spectrum.ieee.org/telecom/wireless/twisted-light-cou…data-rates
“Big deal, you say? It most certainly was. The concept of orbital angular momentum (OAM) has done nothing less than inspire a reimagining of what we’re capable of doing with electromagnetic radiation. Beams that carry OAM can be used to move tiny objects, and they have been used to enhance the resolving power of microscopes.”

What is the internet? 13 key questions answered.

Continue reading “Why Twisted Light Holds the Key to Radically Faster Internet” | >