Menu

Blog

Archive for the ‘engineering’ category: Page 32

Feb 27, 2023

New strategy proposed for bandgap engineering and maintaining material properties under high pressure

Posted by in categories: engineering, materials

Prof. Ding Junfeng and his team from the Hefei Institutes of Physical Science (HFIPS) of the Chinese Academy of Science, together with Prof. Zhang Genqiang from the University of Science and Technology of China, have achieved band gap optimization and photoelectric response enhancement of carbon nitride in the nitrogen vacancy graphite phase under high pressure.

Their results were published in the journal Physical Review Applied.

Graphitic carbon nitride (g-C3N4) has performed well in many fields, such as high-efficiency photocatalytic hydrogen production and water oxidation. However, the wide band gap of 2.7 eV of the original g-C3N4 limits its light absorption in the visible region. High technology is an to change the properties while remaining composition. Therefore, band gap engineering of g-C3N4 by high-pressure technology can significantly enhance its photocatalytic activity and improve its application potential.

Feb 27, 2023

Researcher develops new methods to measure ‘forever chemicals’ in both the atmosphere and in aerosol particles

Posted by in categories: biotech/medical, chemistry, engineering, health

From regulators to researchers and most industries in between, all eyes are on PFAS, per-and polyfluoroalkyl substances, are a class of highly fluorinated human-made compounds that have been used for decades in everything from nonstick cookware and personal care products to fire-fighting foams and school uniforms. Their commonality and extreme resistance to environmental degradation has made them ubiquitous in ground water, soil, and worst of all humans. Linked to a slew of health risks including liver toxicity, bladder cancer, and decreased immune response to vaccinations, exposure to PFAS is concerning. So, how can we eliminate these “forever chemicals?”

Historically, PFAS substances have only been characterized in water and soil, but the emission of these compounds during chemical manufacturing, use, and disposal results in their emission into the air. Ryan Sullivan, Professor of Mechanical Engineering and Chemistry at Carnegie Mellon University, has been developing new methods to measure PFAS in both the atmosphere and in aerosol particles to answer outstanding questions regarding PFAS atmospheric components that lead to human exposure. His group is also developing new approaches to destroy forever molecules that are not removed by conventional water treatment plants.

The research is published in the journal Environmental Science: Processes & Impacts.

Feb 26, 2023

Project ‘GW’: China to thwart Starlink influence with ‘13,000’ satellites

Posted by in categories: Elon Musk, engineering, internet, satellites

The plan is to dispatch a swarm of satellites in the lower Earth orbit to stop Elon Musk from monopolizing the low-Earth orbit space, claims a report.

China allegedly plans to deploy a swarm of satellites in low Earth orbit to compete with Elon Musk’s Starlink and offer internet services, an alternative to people worldwide.

The plan to dispatch almost 13,000 satellites to throttle Starlink exposure comes under the mysterious project, code name “GW,” according to People’s Liberation Army’s (PLA) space engineering researchers.

Feb 26, 2023

New thermal management technology for electronic devices reduces bulk while improving cooling

Posted by in categories: computing, engineering, space

Electronic devices generate heat, and that heat must be dissipated. If it isn’t, the high temperatures can compromise device function, or even damage the devices and their surroundings.

Now, a team from UIUC and UC Berkeley have published a paper in Nature Electronics detailing a new cooling method that offers a host of benefits, not the least of which is space efficiency that offers a substantial increase over conventional approaches in devices’ power per unit volume.

Tarek Gebrael, the lead author and a PhD student in mechanical engineering, explains that the existing solutions suffer from three shortcomings. “First, they can be expensive and difficult to scale up,” he says. Heat spreaders made of diamond, for example, are sometimes used at the chip level, but they aren’t cheap.

Feb 25, 2023

Orca_Share_Media1667679672926_6994755522877791800.Pdf

Posted by in categories: engineering, existential risks

Geoengineering gone awry a partial solution to the fermi paradox.


Shared with Dropbox.

Feb 23, 2023

Wireless, soft e-skin for interactive touch communication in the virtual world

Posted by in categories: augmented reality, biotech/medical, engineering, internet, virtual reality

Sensing a hug from each other via the internet may be a possibility in the near future. A research team led by City University of Hong Kong (CityU) recently developed a wireless, soft e-skin that can both detect and deliver the sense of touch, and form a touch network allowing one-to-multiuser interaction. It offers great potential for enhancing the immersion of distance touch communication.

“With the rapid development of virtual and augmented reality (VR and AR), our visual and auditory senses are not sufficient for us to create an immersive experience. Touch communication could be a revolution for us to interact throughout the metaverse,” said Dr. Yu Xinge, Associate Professor in the Department of Biomedical Engineering (BME) at CityU.

While there are numerous haptic interfaces in the market to simulate in the , they provide only sensing or . The uniqueness of the novel e-skin is that it can perform self-sensing and haptic reproducing functions on the same interface.

Feb 22, 2023

A Globalist Billionaire Pitches Geoengineering While Others Propose Putting Particles into the Atmosphere and Space

Posted by in categories: engineering, particle physics, space

Arctic and save Greenland’s glaciers.

George Soros proposes geoengineering project to save Greenland’s glaciers.


Less problematic geoengineering already is underway with CO2 direct air capture. But more controversial sunlight blocking is being proposed.

Continue reading “A Globalist Billionaire Pitches Geoengineering While Others Propose Putting Particles into the Atmosphere and Space” »

Feb 20, 2023

Stretching-insensitive stretchable and biocompatible triboelectric nanogenerators

Posted by in categories: energy, engineering, nanotechnology, wearables

Professor Juhyuk Lee of the Department of Energy Engineering has developed an elastic triboelectric generator that can be used in the daily lives of frequent movers. The cause of the output reduction of the elastic triboelectric sensor was identified during joint research with Professor Joohun Lee of Hanyang University’s (ERICA campus) Department of Bio-Nanotechnology. Additionally, the professor used graphene to develop a touch sensor with stable output and expand the application of the triboelectric generator. The study is published in the journal Nano Energy.

Along with the rapid growth of various biosensors and due to the continuous development of semiconductors and small electronic components, there has been a growing interest in triboelectric generators for use as sensors or . To use the triboelectric generator in a wearable device, the material that comes into contact with the body must be safe, and the output must be constant despite any deformations caused by movement.

However, the output of conventional elastic triboelectric generators is affected by its change in form. The reason for this relationship was not clearly understood. Similar to previously existing products, there are limitations to precise detection if the output changes along with the change in form, such as stretching.

Feb 19, 2023

Achieving a better understanding of how the blood-brain barrier works

Posted by in categories: biotech/medical, engineering, neuroscience

Up to now, the use of models to research the barrier that separates the circulatory from the nervous system has proven to be either limited or extremely complicated. Researchers at ETH Zurich have developed a more realistic model that can also be used to better explore new treatments for brain tumors.

Mario Modena is a postdoc working in the Bio Engineering Laboratory at ETH Zurich. If he were to explain his research on the —the wall that protects our central nervous system from harmful substances in the —to an 11-year-old, he would say, “This wall is important, because it stops the bad guys from getting into the brain.” If the brain is damaged or sick, he says, holes can appear in the wall. Sometimes, such holes can actually be useful, for example, for supplying the brain with urgently needed medicine. “So what we are trying to understand is how to maintain this wall, break through it and repair it again.”

This wall is also important from a medical perspective, because many diseases of the central are linked to an injury to the blood-brain barrier. To discover how this barrier works, scientists often conduct experiments on live animals. In addition to such experiments being relatively expensive, may provide only part of the picture of what is going on in a . Moreover, there are some critics, who question the basic validity of animal testing. An alternative is to base experiments on that have been cultivated in the laboratory.

Feb 16, 2023

Conducting supercooled droplet experiments to design and engineer superhydrophobic ice-repellent surfaces

Posted by in categories: engineering, physics

Supercooled droplets can typically freeze on surfaces in nature, and have broad-scale influence on industries where they can adversely impact technical efficiency and reliability. Superhydrophobic surfaces are therefore a materials engineering solution to rapidly shed water and reduce ice adhesion to form promising candidates that resist icing.

However, the impact of supercooled droplet freezing and their effects on droplet-substrate interactions as well as resultant applications across ice-phobic surfaces remain to be explored in physics and materials engineering.

In a new report in Nature Physics, Henry Lambley and a research team in mechanical and processing engineering at the ETH Zurich, Switzerland, studied frozen supercooled droplets resting on textured surfaces. They induced freezing by evacuating the surrounding atmosphere and determined the surface properties required to promote ice formation.

Page 32 of 228First2930313233343536Last